Antagonist Split: The 4-Day Workout Plan That Pairs Opposing Muscles
An antagonist split is a workout split that trains opposing muscle groups in the same session: chest with back, biceps with triceps, quads with hamstrings. You alternate one set for each muscle, so one side rests while the other works, and you fit the same work into less time.
| Antagonist split at a glance | |
|---|---|
| Schedule | Mon chest, back & arms · Tue legs · Thu chest, back, shoulders & arms · Fri legs |
| Who it suits | Lifters with about 6+ months of training who want shorter sessions |
| Session length | About 45–50 minutes |
| Set style | Paired sets on most lifts; heavy squats, deadlifts and leg accessories as straight sets |
| Block | 5 weeks of progression, then a deload week |
Ready to start? Save the Antagonist Split plan in JEFIT, or have the Adaptive Plan write one to fit your goal and training days.
What is an antagonist split?
An antagonist split groups muscles that pull in opposite directions on the same joint, then trains each pair in one workout. While your chest presses, your back is resting, and the reverse on the next set, so the session keeps moving without short-changing either muscle.
Most antagonist splits use three pairings: chest and back, biceps and triceps, quads and hamstrings. On Thursday this plan also pairs an overhead press with a pulldown, and side-delt raises with rear-delt face pulls.
Which muscle groups are antagonists?
Antagonist muscles are pairs where one muscle's main job is the opposite of the other's: one bends a joint, the other straightens it, or one pushes and the other pulls.
| Pair | What each does | Example pairing |
|---|---|---|
| Chest / back | Push away from the body / pull toward it | Bench press with bent-over row |
| Biceps / triceps | Bend the elbow / straighten it | Barbell curl with rope pushdown |
| Quads / hamstrings | Straighten the knee / bend it | Leg extension with leg curl |
| Shoulders / lats | Press overhead / pull down from overhead | Shoulder press with lat pulldown |
| Abs / lower back | Curl the spine forward / extend it | Crunch with back extension |
Should you superset antagonist exercises?
Yes, for most lifts. Alternating sets of opposing muscles lets you do the same number of reps in a shorter session, and it builds about as much muscle and strength as doing all sets of one exercise before the next.
A 2025 meta-analysis of 19 studies with 313 participants found supersets matched traditional sets on total reps and volume while shortening the session, with similar long-term gains in muscle size and maximal strength (Zhang et al., Sports Medicine, 2025). Among superset types, pairing opposing muscles was the one that let lifters complete more reps than traditional sets.
Single-session studies point the same way. When 15 trained men did each seated row set straight after a bench press set, with no rest inside the pair and 2 minutes after it, they moved more total weight on every set of both lifts than with 2-minute rests between straight sets (Paz et al., Journal of Strength and Conditioning Research, 2017). In 16 trained men lifting heavy, paired bench pulls and bench presses kept more of their load across 3 sets in the same 10 minutes (Robbins et al., Journal of Strength and Conditioning Research, 2010).
Over 8 weeks, trained men who alternated pulling and pushing sets finished their sessions in about half the time, and their bench press and bench pull 1-rep maxes still went up significantly (Robbins et al., Journal of Sports Sciences, 2009).
| Straight sets | Paired sets (this plan) | True superset | |
|---|---|---|---|
| How it runs | All sets of A, then all sets of B | A, rest, B, rest, repeat | A then B with no rest, then rest |
| Rest between sets of the same muscle | The rest you choose | Two rests plus the other set: about 3–4 min on 75–90 s pairs, 2–3 min on 45–60 s pairs | One rest, often 1–2 min |
| Best for | Heavy squats and deadlifts | Most upper-body and machine work | Light arm and shoulder work when time is short |
The trade-off is effort: supersets felt harder, with higher ratings of perceived exertion, in the same meta-analysis. That is why the squat and Romanian deadlift in this plan stay as straight sets. For the basics of every superset type, see what a superset is.
The 4-day antagonist split workout plan
Exercises with the same letter are a pair: do one set of A1, rest, one set of A2, rest, and repeat until both are done. The rest shown is the rest after that exercise, so on the heavy pairs each muscle gets about 4 minutes before its next set. Warm up with 2 lighter sets of each exercise in the first pair. Wednesday, Saturday and Sunday are rest days.
Stop most sets with 1–3 reps left. Training to failure added only a trivial amount of muscle across 15 studies (Refalo et al., Sports Medicine, 2023), and on paired sets it also drains the next set of the pair.
Monday: Chest & Back A (heavy)
| Pair | Exercise | Sets × reps | Rest |
|---|---|---|---|
| A1 | Barbell bench press | 4 × 6–8 | 90 s |
| A2 | Barbell bent-over row | 4 × 6–8 | 90 s |
| B1 | Dumbbell incline bench press | 3 × 8–12 | 90 s |
| B2 | Pull-up | 3 × 6–10 | 90 s |
| C1 | Barbell curl | 3 × 8–12 | 60 s |
| C2 | Rope tricep pushdown | 3 × 10–12 | 60 s |
Pairing note: set the row up beside the bench so you can move between them in a few steps. Fewer than 6 pull-ups? Pair the incline press with a wide-grip lat pulldown for now, and follow the pull-up progression guide to get there.
Tuesday: Legs A (quad focus)
| Pair | Exercise | Sets × reps | Rest |
|---|---|---|---|
| – | Barbell squat | 4 × 6–8 | 3 min |
| – | Dumbbell Bulgarian split squat | 3 × 8–12 each leg | 90 s |
| A1 | Leg extension | 3 × 10–15 | 60 s |
| A2 | Lying leg curl | 3 × 10–15 | 60 s |
| – | Standing calf raise (machine) | 3 × 10–15 | 60 s |
Pairing note: the squat gets full rest because a heavy squat right after a hard hamstring set costs reps. The quad–hamstring pair comes near the end, when the loads are lighter.
Thursday: Chest, Back & Shoulders B
| Pair | Exercise | Sets × reps | Rest |
|---|---|---|---|
| A1 | Dumbbell shoulder press | 3 × 8–12 | 90 s |
| A2 | Wide-grip lat pulldown | 3 × 8–12 | 90 s |
| B1 | Cable crossover | 3 × 10–15 | 60 s |
| B2 | Cable seated row | 3 × 10–12 | 60 s |
| C1 | Dumbbell lateral raise | 3 × 12–15 | 45 s |
| C2 | Cable rope face pull | 3 × 12–15 | 45 s |
| D1 | Dumbbell incline curl | 3 × 10–12 | 60 s |
| D2 | Cable rope overhead tricep extension | 3 × 10–12 | 60 s |
Pairing note: this is the longest day, 24 sets, and the one where pairing saves the most time. Pairs B and C both use a cable stack; if you can, claim a dual cable station for the whole block.
Friday: Legs B (hamstring focus)
| Pair | Exercise | Sets × reps | Rest |
|---|---|---|---|
| – | Barbell Romanian deadlift | 4 × 6–8 | 2.5 min |
| A1 | Leg press | 3 × 10–12 | 75 s |
| A2 | Seated leg curl | 3 × 10–12 | 75 s |
| – | Barbell hip thrust | 3 × 8–12 | 90 s |
| – | Seated calf raise | 3 × 12–15 | 60 s |
Pairing note: keep the Romanian deadlift as straight sets with a flat back; your hamstrings get the full rest they need before the leg press and curl pair.
Does an antagonist split build muscle?
Yes, when it gives each muscle enough weekly sets. This plan gives back and quads 13 hard sets a week and chest and hamstrings 10 each. More weekly sets produced more growth in a dose-response meta-analysis of 15 studies, with each added set linked to a small extra gain (Schoenfeld et al., Journal of Sports Sciences, 2017).
| Muscle | Direct sets a week | Days |
|---|---|---|
| Back | 13 | Mon, Thu |
| Quads | 13 | Tue, Fri |
| Chest | 10 | Mon, Thu |
| Hamstrings | 10 | Tue, Fri |
| Shoulders | 9 | Thu (plus pressing on Mon) |
| Biceps | 6 | Mon, Thu |
| Triceps | 6 | Mon, Thu |
| Calves | 6 | Tue, Fri |
| Glutes | 3 | Fri (plus squats, split squats and deadlifts) |
Arms get more work than the direct count shows: rows and pulldowns load the biceps, and presses load the triceps. Pelland and colleagues' 2025 meta-regression of 67 studies predicted growth best when each of those indirect sets was counted as half a set (Pelland et al., Sports Medicine, 2025). By that count, biceps get about 12–13 sets a week here.
Chest, back, quads, hamstrings, biceps, triceps and calves are each trained on two days a week. Spreading a muscle's weekly work over two sessions beat a single weekly session for growth when 10 studies were pooled (Schoenfeld et al., Sports Medicine, 2016).
How do you progress on an antagonist split?
Progress each lift in a pair on its own: add a rep each week until every set hits the top of the range, then add weight and start again at the bottom. Both routes work: in an 8-week lower-body trial with trained lifters, adding reps and adding load grew muscle about equally (Plotkin et al., PeerJ, 2022).
| Week | Bench press (A1) | Bent-over row (A2) |
|---|---|---|
| 1 | 60 kg · 4 × 6 | 50 kg · 4 × 6 |
| 2 | 60 kg · 4 × 7 | 50 kg · 4 × 7 |
| 3 | 60 kg · 4 × 8 | 50 kg · 8, 8, 7, 7 |
| 4 | 62.5 kg · 4 × 6 | 50 kg · 4 × 8 |
| 5 | 62.5 kg · 4 × 7 | 52.5 kg · 4 × 6 |
| 6 | Deload: 62.5 kg · 2 × 6 | Deload: 52.5 kg · 2 × 6 |
The weights are an example; start at a weight you could lift for about 8 clean reps, then stop at 6. The row in week 3 shows the point: two sets fell short of 8, so it stays at 50 kg for another week while the bench moves up. Keep rest the same from week to week, because shorter rest on paired sets cuts the reps you can do on the next one.
The week-6 deload keeps the weights and halves the sets. Bell and colleagues describe a deload as a planned stretch of lighter training, typically about a week every 4–6 weeks (Bell et al., Sports Medicine – Open, 2023). In JEFIT, each set opens with the weight and reps you logged last time, so you can see at a glance which half of the pair is due for more weight.
Antagonist split vs push pull legs and upper lower
An antagonist split puts pushing and pulling muscles in the same workout; push pull legs separates them onto different days, and an upper lower split trains them together but usually as straight sets.
| Antagonist split | Upper lower | Push pull legs | |
|---|---|---|---|
| Days a week | 4 | 4 | 6 |
| Chest and back | Same session, alternating sets | Same session, usually back to back | Different days |
| Pick it if | you want 4 days and shorter sessions | you want 4 days with full rest on every lift | you have 6 days and recover well |
The Arnold split uses the same idea, chest with back and shoulders with arms, over 6 days. The workout split guide compares the common splits by days a week and goal.
Is an antagonist split good for beginners?
It can be, but it is not the first plan to pick. Paired sets ask you to manage two stations, two weights and steady rest at once; most beginners do better learning the lifts with straight sets on one of JEFIT's beginner plans, then moving to this split after about 6 months.
Bottom line
- If you can train 4 days and want sessions under an hour, run this antagonist split.
- If you would rather take full rest on every lift, run the 4-day upper lower split instead.
- If you are in your first months of lifting, start with a beginner plan and come back to paired sets later.